Print Friendly
J&H is now providing comprehensive equipment and operation audits for your J&H machines to ensure they are performing at their highest potential and efficiency.
If you would like to know more, please visit the Service Plan tab.
October 19, 2022 by
The J&H Mod III Vibrating Screens are built around our unique tuned suspension tensioning system. This system optimizes uniformity and distribution of vibration throughout the screening surface. This is achieved with minimum power consumption, structural live loads, and maintenance requirements. Experience the J&H advantage today by contacting a representative for your next project.
October 10, 2022 by
The J&H Automatic Product Sampler is designed to enable users to test the quality of dry bulk product by taking a sample from a falling stream of material. The J&H Automatic Sampler collects sample material in a cup that rotates through the falling stream of material. The sample is then discharged into a container and the cup returns to its original, shielded position until the next sample is initiated.
The J&H Samplers are compact, efficient, and dependable boasting a proven drive system with no critical components exposed to material. All Samplers are made to order and are available in multiple sizes and materials of construction in order to fit the requirements of your plant layout, chute size and orientation, and type of product material. The Sampler features a large removeable top panel which allows for quick and easy maintenance
Sample frequency and quantity are adjustable to fit specific sampling needs and sample intervals can be set to any point between 2 and 30 minutes. Production is not interrupted during sampling process.
Experience the J&H advantage today by contacting a representative for your next project.
August 1, 2022 by
The J&H HD Dual Rotor Chain Mill utilizes rotors equipped with hardened chain flails rotating in opposite direction. Material is fed into the mill where it is separated and directed into the optimal crushing zones of each high speed rotor. Material is impacted by the chains and redirected into the path of the opposition rotor, generating a unique crushing efficiency.
J&H HD Chain Mills are designed with a cantilever-mounted “floating rotor” which reduces vibration transmission to a negligible amount. This design feature allows the machine to be installed directly onto a concrete or steel floor without the addition of costly structural considerations or isolation pads. The chain mills feature large front access doors and side-hung access doors that provide unparalleled quick access for inspection and maintenance.
Robust, solid welded chain mill frames are equipped with impact zone rubber pads that are designed for longevity and ease of maintenance. Rotor chains can be easily inspected or replaced without disassembly of additional parts of the chain mill. Zero speed switch and safety switches are available as required.
May 31, 2022 by
J&H is proud to offer a variety of casting and forging services!
J&H Equipment specializes in hardened cast hammers, forged chains, machined knives, and wear liners for hammer mills, chain mills, crushers, lump breakers, chippers, etc. Most products can be designed and/or duplicated to meet existing needs while offering competitive pricing and improved availability. Don’t let supply chain disruptions affect your efficiency and performance.
Contact J&H for your cast and forge needs at (770) 992-1606 or at jhsys@jhequipment.com.
May 24, 2022 by
J&H is proud to be featured in the May/June 2022 issue of World Fertilizer on the benefits of high-frequency incline screening machines.
To view the article in its entirety click the image below:
April 11, 2022 by
J&H introduces its newest MOD 3.5 “Check Screen” – designed to eliminate debris or oversize material in product.
Dust-tight and water-tight, this screen is compact and portable. The MOD 3.5 “Check Screen” is a great contamination removal solution for on-location frac screening at oil and gas drill sites.
Experience the J&H advantage today by contacting a representative for your next project.
March 3, 2022 by
J&H meets the demand for frac sand screening plants, with low maintenance, low power consumption, and high yield. J&H has supplied multiple dry screening plants ranging from 150tph to 1200tph to the frac sand industry.
All of our equipment is custom made in house and built to the highest standards with a focus on efficient dry screening/processing.
Experience the J&H advantage today by contacting a representative for your next project.
February 22, 2022 by
Visit us virtually at the 2022 Fertilizer Latino Americano Conference on March 21-23 at fla-conference
November 3, 2021 by
J&H is now proud to offer a variety of casting, forging, and machining services!
Today’s market is facing supply chain disruptions and material shortages which have severely impacted pricing and availability. J&H provides an alternative source to meet production demands, minimize disruptions, and stabilize your supply chain.
With our 45+ years of experience we can offer a range of different items for the phosphate and chemical industries. We also have the tools and knowledge to offer a variety of casting, forging, and machining services for your general need. We can duplicate most products with highest quality standards and offer competitive pricing, and availability.
To learn more please browse our brochures or contact us at (770) 992-1606 or at jhsys@jhequipment.com. We look forward to working with you to meet any cast, forge, and machining needs!
General Brochure Phosphate and Chemical Brochure
J&H Equipment Inc.